News

Renewing the look of your room by decorative wall panel is a quick and easy way for you to take into account.You can install the wall panels yourself. This simple work can be done within one week.

Here are Six Steps To Install Your Decorative Wall Panel:

1.prepare the decorative wall panel

Before you start to install,put your new decorative wall panels into the room about two days.This will allow them to become conditioned to the air and moisture levels in the room.

2. sand the decorative wll panel

Use your sandpaper to smooth any rough or high spots on the panels. Before you begin installing the decorative wall panel.you will want the surface to be flat and even.

3.determine the stud locations

Use your stud finder to determine the location of the studs in the room. Use a pencil to mark each location. You will make sure the panels to the studs for more support.

4.install the brace

Be sure your bracing onto the studs of the walls at six-inch intervals. Make sure as many braces as possible for strong support.

5.secure the decorative wall panels

To secure the panels to the walls by finishing screws  Secure two panels to each of the studs with one on either side. Remember to leave an 1/8 inch allowance space between your panels.

6.finish the decorative wall panels

Use molding to hide the panel joint seams. Secure more molding along the top and the bottom of the decorative wall panels as well.

install your decorative wall panel by yourself